Agilent B1500 VXIplug&play Driver User’s Guide, Edition 3 2-5
Driver Functions
Staircase sweep
with pulsed bias
measurement
agb1500_force Applies DC current or voltage from the specified SMU.
agb1500_setIv Sets the sweep source.
agb1500_setPbias Sets the pulsed bias source.
agb1500_setSweepSync Sets the synchronous sweep source.
agb1500_stopMode Sets automatic sweep abort and post sweep output.
agb1500_sweepPbias Performs sweep measurement with pulsed bias.
Multi channel
sweep
measurement
agb1500_force Applies DC current or voltage from the specified SMU.
agb1500_setIv Sets the sweep source.
agb1500_setNthSweep Sets the synchronous sweep source.
agb1500_stopMode Sets automatic sweep abort and post sweep output.
agb1500_msweepIv Performs sweep measurement by one measurement
channel with multiple sweep sources.
agb1500_msweepMiv Performs sweep measurement by multiple measurement
channels with multiple sweep sources.
Sampling
measurement
agb1500_force Applies DC current or voltage from the specified SMU.
agb1500_addSampleSyncIv Sets source channel for the sampling measurement.
agb1500_setSampleMode Sets sampling mode, linear or logarithm.
agb1500_setSample Sets sampling timing parameters.
agb1500_stopMode Sets automatic abort and post measurement output.
agb1500_sampleIv Performs sampling measurement.
agb1500_clearSampleSync Clears the source channels for the sampling measurement.
Breakdown
voltage
measurement
agb1500_force Applies DC current or voltage from the specified SMU.
agb1500_setBdv Sets the quasi pulse source.
agb1500_measureBdv Performs quasi pulsed spot breakdown voltage
measurement.
Category Function Description
To Next Page
Loading...
Need help?
General
