Agilent Technologies B1500A User Manual

2-6 Agilent B1500 VXIplug&play Driver User’s Guide, Edition 3
Driver Functions
Leakage current
measurement
agb1500_force Applies DC current or voltage from the specified SMU.
agb1500_setIleak Sets the quasi pulse source.
agb1500_measureIleak Performs quasi pulsed spot leakage current measurement.
CV sweep
measurement
agb1500_force Applies DC current or voltage from the specified SMU.
agb1500_setCmuFreq Sets the MFCMU measurement frequency.
agb1500_forceCmuAcLevel Applies AC voltage from the MFCMU.
agb1500_setCv Sets the DC bias sweep source.
agb1500_stopMode Sets automatic sweep abort and post sweep output.
agb1500_sweepCv Performs CV sweep measurement.
Primitive
Measurement
Functions
agb1500_startMeasure Specifies measurement mode, and performs measurement.
agb1500_readData Reads and returns the source setup data or the data
measured by the agb1500_startMeasure function.
Utility agb1500_reset Executes the B1500 reset.
agb1500_self_test Executes the B1500 self-test.
agb1500_error_query Queries the B1500 for error code/message.
agb1500_error_message Queries for the driver errors.
agb1500_revision_query Queries for the B1500 firmware/driver revisions.
agb1500_timeOut Sets the timeout.
agb1500_timeOut_Q Queries for the timeout setting.
agb1500_errorQueryDetect Sets the automatic error checking.
agb1500_errorQueryDetect_Q Queries for the automatic error checking setting.
agb1500_dcl Sends the Device Clear.
agb1500_readStatusByte_Q Reads the B1500 status byte.
agb1500_opc_Q Checks the B1500 operation completion status.
Category Function Description

Agilent Technologies B1500A Specifications

General

Brand	Agilent Technologies
Model	B1500A
Category	Measuring Instruments
Language	English