Agilent Cary 8454 UV-Visible Spectroscopy System Operator’s Manual 41
Introduction to Your System 2
General Purpose Agilent ChemStation Software for UV-Visible Spectroscopy — Overview
Spectral
Processing
Your method defines how this data is analyzed. The first processing step is
spectral processing. The processed raw data spectra are transferred
automatically into a second container for processed spectra. This allows
you to examine the results of this processing step by viewing the processed
spectra container’s content. If, for example, you specified the first
derivative data type, the first derivative spectra of all your raw data are
available in the processed spectra container after analysis. The type of
spectral operation is defined by your method settings.
Used Wavelength
The next step in the data analysis process is the provision of data for
further evaluation specified in terms of wavelength and background
correction operations such as an internal reference calculation or
three-point, drop-line calculation.
This data is stored in the used wavelength container. In the Fixed
Wavelength task, for example, a tabular view of this data is available with
the Sample/Results Table window.
Results An additional step is the evaluation of the accessed data.
To Next Page
Loading...
Need help?
General
