40 Agilent Cary 8454 UV-Visible Spectroscopy System Operator’s Manual
2 Introduction to Your System
General Purpose Agilent ChemStation Software for UV-Visible Spectroscopy — Overview
Standard Mode Data Processing
General Data Processing
Although knowledge of the internal design of the data flow and processing is
not required to use Agilent ChemStation software, it can be useful to
understand how Agilent ChemStation processes your data and how this
processing is controlled by your method parameters.
The data processing can be described using a model of data containers and
operations visualized in a flow diagram.
All basic data go into a raw data container. This container is empty when you
start your Agilent ChemStation session and it is filled by measuring data or
loading data from a file.
The raw data container held the originally acquired data as specified with
your acquisition parameters and stamped with, for example, acquisition date
and time and the acquisition operator’s name.
Raw Data
Processed
Spectra
Used
Wavelength
Results
Spectral Processing
Data Access
Data Evaluation
To Next Page
Loading...
Need help?
General
