18 Agilent Cary 8454 UV-Visible Spectroscopy System Operator’s Manual
1 Safety Information
Environmental Conditions and Power Requirements
Pollution level
The pollution level is 2, based on IEC61010-1. Pollution level describes the
degree to which a solid, liquid or gas that deteriorates dielectric strength is
adhering. '2' applies to a normal indoor atmosphere, where only
non-conductive pollution occurs.
Regulatory Information
CE Compliance
Your Agilent instrument has been designed to comply with the requirements
of the Electromagnetic Compatibility (EMC) Directive and the Low Voltage
(electrical safety) Directive (commonly referred to as the LVD) of the
European Union. Agilent has confirmed that each product complies with the
relevant Directives by testing a prototype against the prescribed EN
(European Norm) standards.
Proof that a product complies with these directives is indicated by:
• the CE Marking appearing on the rear of the product, and
the documentation package that accompanies the product containing a copy of
the Declaration of Conformity. The Declaration of Conformity is the legal
declaration by Agilent that the product complies with the directives listed
above, and shows the EN standards to which the product was tested to
demonstrate compliance.
Electromagnetic Compatibility
EN55011/CISPR11
Group 1 ISM equipment: group 1 contains all Industrial, Scientific and
Medical (ISM) equipment in which there is intentionally generated and/or
used conductively coupled radio- frequency energy which is necessary for the
internal functioning of the equipment itself.
To Next Page
Loading...
Need help?
General
