Agilent Technologies E4419B - Page 111

Power Meter Operation
Presetting the Power Meter
Agilent E4419B User’s Guide 2-71
• is set to 0.000 dB.
• is not affected.
• is not affected.
• is not affected.
• is not affected.
• is not affected.
• is not affecetd.
• is not affected.
• is not affected.
• is not affected.
• is not affected.
• is not affected.
• is set to “On”.
• is set to “AUTO”.
• is set to “Off”.
• is set to 1.000%.
• is set to “Off”.
• is set to 0.000 dB.
• is set to “AUTO”.
• is set to 90.000 dbm ( ) and -90.000 dBm ( ).
• is set to “Off”.
• is set to “Off”.
• is set to 100.0 mW ( ) and 0.00 W
().
• is set to “Off”.
• is set to “A”.
• is not affected.
• is set to “On”
• is set to 100%.
• is set to 100%.
• is not affected.
Offset
System
Inputs
Command Set
Select Interface
GP-IB Addr
Baud Rate
Word size
Stop bits
Parity
Pacing
Echo
A Table Off/On
B Table Off/On
Filter Off/On
Filter
Duty Cycle Off/On
Duty Cycle
Offset Off/On
Offset
Range
Limits
Max Min
Limits Off/On
Power Ref Off/On
Recorder Output
Max Power
Min Power
Output Off/On
Output A B
Must Cal Off/On
Backlight
Zero
Cal
A Ref CF
B Ref CF
Must Cal Off/On
HP4402.book Page 71 Thursday, November 30, 2000 1:39 PM