Regulatory Information
Agilent E4419B User’s Guide ix
Europe Contact:
Your local Agilent Technologies Sales and Service Office or Agilent Technologies GmbH, Department 2Q /
Standards Europe, Herrenberger Strasse 130, D7030 Boblinger (Fax; +49-7031-143143).
Declaration of Conformity
according to ISO/IEC Guide 22 and EN45014
Manufacturer’s Name: Agilent Technologies
Manufacturer's Address:
South Queensferry
West Lothian, EH30 9TG
Scotland, United Kingdom
Declares that the product
Product Name
:
Dual Channel Power Meter
Model Numbers:
Agilent E4419B
Product Options:
This declaration covers all options of the above products as detailed in
TCF A-5951-9852-02
Conforms with the protection requirements of European Council Directive 89/336/EEC on the approximation
of the laws of the member states relating to electromagnetic compatibility.
Against EMC test specifications EN 55011:1991 (Group 1, Class A) and EN 50082-1:1992
As Detailed in:
Electromagnetic Compatibility (EMC)
Technical Construction File (TCF) No. A-5951-9852-01
Assessed by:
Dti Appointed Competent Body
EMC Test Centre,
GEC-Marconi Avionics Ltd.,
Maxwell Building,
Donibristle Industrial Park,
KY11 5LB
Scotland, United Kingdom
Technical Report Number:6893/2200/CBR, dated 23 September 1997
Supplementary Information: The product conforms to the following safety standards
EN61010-1 (1993) / IEC 1010-1 (1990) + A1 (1992)
CSA-C22.2 No. 1010.1-92
EN60825-1 (1994) / IEC 825-1 (1993)
The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC, and carries the
CE-marking accordingly. This product is also designed to meet IPx4 in accordance with IEC 60529:1989 / EN
60529:1992.
South Queensferry, Scotland 22 October 1998
Location Date
R.M. Evans / Quality Manager
HP4402.book Page ix Thursday, November 30, 2000 1:39 PM
To Next Page
Loading...
Need help?
General
