Power Meter Operation
Making Measurements using Sensor Calibration Tables
2-24 Agilent E4419B User’s Guide
Figure 2-5: “Edit Cal” Screen
The power meter is shipped with a set of predefined sensor calibration
tables. The data in these tables is based on statistical averages for a range
of Agilent Technologies power sensors.
These power sensors are:
• DEFAULT
1
• Agilent 8481A
• Agilent 8482A
2
• Agilent 8483A
• Agilent 8481D
• Agilent 8485A
• Agilent R8486A
• Agilent Q8486A
• Agilent R8486D
• Agilent 8487A
1. DEFAULT is a sensor calibration table in which the reference calibration
factor and calibration factors are 100%. This sensor calibration table can be
used during the performance testing of the power meter.
2. The Agilent 8482B and Agilent 8482H power sensors use the same data as
the Agilent 8482A.
HP4402.book Page 24 Thursday, November 30, 2000 1:39 PM
To Next Page
Loading...
