98 Chapter 6
Replacement Procedure
Front Panel Assembly Removal
Front Panel Assembly Removal
Tools required
• Torque screwdriver, TORX T10
• Torque screwdriver, TORX T20
• Box torque wrench, 7 mm
• Box torque wrench, 5/8 inch
Removal Procedure
The Front Panel Assembly removal process is same as A2 Analog Board removal process.
Refer to removal procedure of the
“A2 Analog Board Replacement” on page 96.
Replacement Procedure
The Front Panel Assembly replacement process is reverse order of the A2 Analog Board
removal process. Refer to removal procedure of the
“A2 Analog Board Replacement” on
page 96.
To Next Page
Loading...
