Agilent Technologies E4980A - To Check the Bias Current Interface Function (Option 002 Only)

Chapter 4 53
Troubleshooting
Function Specific Troubleshooting
4. Troubleshooting
To Check the Bias Current Interface Function (Option 002 only)
This test verifies the bias current interface functions.
Equipment
Procedure
Step 1. Set all switches of S1 and S2 on the bias interface simulator to ‘1’ as shown in Figure 4-14.
Table 4-12 Equipment List of the Bias Current Interface Function Test (Option 002 only)
Bias Interface Simulator Agilent p/n 42841-65001
Bias Interface Cable Agilent p/n 42841-61640
DC Power Supply Agilent E3610A
Adapter Agilent p/n E4980-60102