26 Chapter 2
Troubleshooting
Booting Process Troubleshooting
Step 1. Splash Screen
The splash screen is displayed with Agilent logo as shown in Figure 2-8.
If the splash screen is displayed, you can assume that the A50/A60 CPU Module is
functioning correctly.
NOTE While the splash screen is displayed, if you want to run the BIOS setup utility, push F2 key
as soon as in the screen. The password to enter BIOS setup unility is agt0nly ( 0 is Zero,
not o).
Figure 2-8 Splash Screen
Step 2. Boot up Screen
The Boot up screen is displayed as shown in Figure 2-9.
Without choose any choice, the system will continue boot up process after 3 second.
NOTE While the Boot up screen is displayed, if you want to do system recovery , please select
“Agilent Recovery System” as soon as in the screen.
Figure 2-9 Boot up Screen
Step 3. Windows boot screens
The Windows boot screens are displayed. The Windows boot screens consists of two
screens. Each screen is displayed in the order as shown in
Figure 2-10. If the Windows
To Next Page
Loading...
Need help?
General
