Theory of Operation 4
E4416A/E4417A Power Meters Service Guide 79
A3 Front Panel Assembly
The front panel assembly is made up of a liquid crystal display (LCD), a
keypad and, depending on the power meter option, a power reference cable
assembly and a sensor cable assembly.
There are two inputs to the front panel assembly:
• The flex circuit from connector A2J4 of the processor assembly which
controls the keypad.
• The ribbon cable from A2J3 of the processor assembly which controls the
LCD display.
The power meter self tests contain display tests. These are
accessed by pressing , ,
, ,
.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
