52 1200 Series DAD and MWD User Manual
4Using the Detector
7 For the isocratic pump, fill the solvent bottle with the mixture of
HPLC-grade bi-distilled water (30 %) and acetonitrile (70 %). For binary-
and quaternary pumps you can use separate bottles.
8 Click on the Load Method button and select
DEF_LC.M and press OK.
Alternative double-click on the method in the method window. The default
LC method parameters are transferred into the 1200 modules.
Figure 11 Loading Default LC Method
To Next Page
Loading...
