Agilent InfinityLab LC Series VWD User Manual 80
7 Error Information
What Are Error Messages 81
General Error Messages 82
Timeout 82
Shutdown 83
Remote Timeout 84
Lost CAN Partner 84
Leak 85
Leak Sensor Open 85
Leak Sensor Short 86
Compensation Sensor Open 86
Compensation Sensor Short 87
Fan Failed 87
Open Cover 88
ERI Messages 88
Detector Error Messages 89
UV lamp: no current 89
UV lamp: no voltage 90
Ignition Failed 90
No heater current 91
Wavelength calibration setting failed 92
Wavelength holmium check failed 93
Grating or Filter Motor Errors 94
Wavelength test failed 94
Cutoff filter doesn't decrease the light intensity at 250 nm 95
ADC Hardware Error 95
Illegal Temperature Value from Sensor on Main Board 96
Illegal Temperature Value from Sensor at Air Inlet 96
Heater at fan assembly failed 97
Heater Power At Limit 97
Cover Violation 98
This chapter describes the meaning of detector error messages, and provides
information on probable causes and suggested actions how to recover from
error conditions.
To Next Page
Loading...
Need help?
General
