Agilent InfinityLab LC Series Vialsamplers User Manual 112
3Using the Module
Using the Optional Integrated Column Compartment
Availability of Column Information
The ChemStation Columns Table
The Edit Columns dialog box, which you access using the Columns command of
the Instrument menu in Method and Run Control view, shows the detailed
information about the columns attached to each position in the device. The table
contains all the column-specific information stored in the column ID tags (see
“Column Tag Information” on page 114) plus the following possible additional
columns:
The table includes not only the columns that are installed in the column
thermostat device(s), but also the inventory of other available columns, for
example, columns that have been used in the past. The ChemStation also
provides a catalog of column types, which you can load into the Edit Columns
table to act as templates for other columns.
Installed YES when the column is installed in a device.
no when the column is not installed in a device.
Location Shows the location in the device to which the plumbing of the valve
position leads.
Dev. Serial# Present only for a valve thermostat cluster.
Shows the serial number of the device that contains the column.
Tag Shows if the column has column ID tag (Used), if it sealed (Sealed)
or the column has no tag (empty).
To Next Page
Loading...
Need help?
General
