Agilent Technologies G7129A User Manual

Agilent InfinityLab LC Series Vialsamplers User Manual 14
1Introduction
Product Description (G7129C)
Product Description (G7129C)
The Agilent 1260 Infinity II Vialsampler is an autosampler designed for the
reliability and ease-of-use needed for routine pharmaceutical tasks and quality
control, as well as for environmental and food analyses. It can house optionally
the integrated column compartment for two LC columns with temperature
control up to 80
°C as well as a sample thermostat for stable temperatures from
4
°C to 40 °C, all within one module.
Figure 3 Overview of the Vialsampler
Status indicator
Needle assembly
Drawer
Column shelf
Leak drain
Power switch

Agilent Technologies G7129A Specifications

General

Category	Laboratory Equipment
Manufacturer	Agilent Technologies
Model	G7129A
Storage Temperature	-40°C to 70°C
Description	The Agilent G7129A

Summary

Introduction to Agilent InfinityLab LC Vialsamplers

Module Overview and Operating Principle

Provides a high-level understanding of the Vialsampler's design, key components, and operational principles.

Key Components and Handling

Details essential components like the Needle Parkstation, Hydraulic Box, Transport Assembly, and Leak/Waste Handling.

Site Requirements and Specifications

Environmental and Physical Specifications

Details the necessary environmental conditions, power considerations, and physical characteristics for instrument installation.

Performance Specifications

Lists key performance metrics and specifications for Vialsampler models and optional modules like the Sample Cooler.

Using the Agilent InfinityLab LC Vialsampler

Basic Operation and Vial Handling

Covers module operation basics, status indicators, vial drawers, and sample loading procedures.

Optional Module Installation and Operation

Guides users through installing and operating optional components like the Integrated Column Compartment and Sample Cooler.

Transporting the Sampler

Provides instructions on how to prepare the sampler for transportation to prevent damage during movement.

Preparing the Module for Operation

System Setup and Configuration

Guides users through setting up the Vialsampler, including network, control, method parameters, and module configuration.

Optimizing Performance for Chromatography

Carryover Reduction and Injection Optimization

Offers techniques to minimize carryover and optimize injection cycle times for improved chromatographic results.

Injection Volume Precision and Speed

Details methods for achieving precise injection volumes and optimizing draw/eject speeds.

Troubleshooting and Diagnostics

Status Indicators and Test Overview

Explains module status indicators and provides an overview of available diagnostic tests and tools.

Maintenance and Troubleshooting Procedures

Details procedures for component maintenance, gripper verification, and injector step diagnostics.

Diagnostic Tests and Software Tools

Explains diagnostic tests for modules like Sample Cooler/Thermostat and Heater, and the use of Agilent Lab Advisor.

Error Information and Troubleshooting

General and Vialsampler Error Messages

Lists general error messages and Vialsampler-specific errors with probable causes and suggested actions.

Module-Specific Error Messages

Details error messages related to Sample Cooler/Thermostat and the Integrated Column Compartment heater.

Maintenance Procedures for the Vialsampler

Module Cleaning and Component Replacement

Covers module cleaning, door removal/installation, and replacement of parts like needle assembly, rotor seal, and pump cartridge.

Firmware Updates and Cooler/Thermostat Replacement

Explains how to replace module firmware and the Sample Cooler/Sample Thermostat.

Parts and Materials for Maintenance

Standard Parts, Kits, and Drawers

Lists standard parts, PM kits, needle assemblies, sample loops, vial drawers, and trays for maintenance.

Optional Modules and Upgrade Kits

Details parts for Sample Thermostat Upgrade, Integrated Column Compartment, and Column ID Upgrade Kit.

Analytical Heads and Injection Valves

Lists components for Analytical Head assemblies (40, 100, 900 µL) and Injection Valves (600, 800, 1300 bar).

Identifying Cables for System Connectivity

Cable Overview and Specifications

Details various cables including Analog, Remote, CAN/LAN, RS-232, and USB cables used with Agilent modules.

Hardware Information and Configuration

Firmware, Electrical Connections, and Interfaces

Covers firmware details, electrical connections, module interfaces, and their capabilities.

Configuration Switches and Special Settings

Explains the 6-bit configuration switch, its settings, and special modes like boot/forced cold start.

LAN Configuration and ChemStation Setup

Initial Network Setup and Parameter Configuration

Guides users through initial LAN setup, TCP/IP parameters, DHCP, and manual configuration.

PC and Agilent ChemStation Integration

Explains PC setup for local configuration and integration with Agilent ChemStation software.

Appendix: Safety, Regulatory, and Solvent Information

General Safety Precautions and Symbols

Provides essential safety precautions, hazard symbols, and handling guidelines for instrument operation.

Environmental and Regulatory Compliance

Covers WEEE directive, refrigerant handling, radio interference, sound emission, and solvent information.