Agilent InfinityLab LC Series Vialsamplers User Manual 226
8Maintenance
Overview of Maintenance
Overview of Maintenance
It is necessary to perform periodic inspection of this instrument to ensure its safe
use. It is possible to have these periodic inspections performed by Agilent service
representatives on a contractual basis. For information regarding the
maintenance inspection contract, contact your Agilent representative.
The following pages describe the maintenance (simple repairs) of the module
that can be carried out without opening the main cover.
Table 21 Overview of maintenance
Procedure Typical interval (minimum)
Change needle/needle seat 30000 needle into seat movements
Change peristaltic pump cartridge 3000 h on time
Change rotor seal 30000 injections
Change metering seal 30000 injections
To Next Page
Loading...
Need help?
General
