Agilent InfinityLab LC Series Vialsamplers User Manual 225
8Maintenance
Warnings and Cautions
Toxic, flammable and hazardous solvents, samples and reagents
The handling of solvents, samples and reagents can hold health and safety
risks.
When working with these substances observe appropriate safety
procedures (for example by wearing goggles, safety gloves and
protective clothing) as described in the material handling and safety
data sheet supplied by the vendor, and follow good laboratory practice.
The volume of substances should be reduced to the minimum required
for the analysis.
Do not operate the instrument in an explosive atmosphere.
Safety standards for external equipment
If you connect external equipment to the instrument, make sure that you
only use accessory units tested and approved according to the safety
standards appropriate for the type of external equipment.
Heavy weight
The module is heavy.
Carry the module at least with 2 people.
Avoid back strain or injury by following all precautions for lifting heavy
objects.
Ensure that the load is as close to your body as possible.
Ensure that you can cope with the weight of your load.
To Next Page
Loading...
Need help?
General
