Agilent InfinityLab LC Series Vialsamplers User Manual 206
7Error Information
Vialsampler Error Messages
Motor alignment failed
Error ID: 34221
The alignment of the transport assembly stepper motors failed during the
initialization process.
• 34221,0 corresponds to the X-axis stepper motor.
• 34221,1 corresponds to the Z-axis stepper motor.
• 34221,2 corresponds to the theta stepper motor.
• 34221,3 corresponds to the gripper stepper motor.
Probable cause Suggested actions
1
Potential hardware error
Please contact your Agilent service representa-
tive.
To Next Page
Loading...
Need help?
General
