164 Agilent InfinityLab LC Series 1260 Infinity II Isocratic- and Quaternary Pumps User Manual
8
Maintenance
Reinstall the Pump Head Assembly
9
Close the doors.
Next Steps:
10
If a standard seal has been installed, run the seal
wear-in procedure, which includes a replacement of the
purge valve frit (“Seal Wear-in Procedure” on page 165).
11
For the normal phase seal, the purge valve frit should be
replaced, see “Exchange the Purge Valve Frit or the
Purge Valve” on page 146.
To Next Page
Loading...
