Agilent Technologies LC Series User Manual

242 Agilent InfinityLab LC Series 1260 Infinity II Isocratic- and Quaternary Pumps User Manual
12 LAN Configuration
Manual Configuration
Manual Configuration
Manual configuration only alters the set of parameters stored in the
non-volatile memory of the module. It never affects the currently active
parameters. Therefore, manual configuration can be done at any time. A
power cycle is mandatory to make the stored parameters become the active
parameters, given that the initialization mode selection switches are allowing
it.
Figure 29 Manual Configuration (Principle)
With Telnet
Whenever a TCP/IP connection to the module is possible (TCP/IP parameters
set by any method), the parameters may be altered by opening a Telnet
session.
1 Open the system (DOS) prompt window by clicking on Windows START
button and select “Run...”. Type “cmd” and press OK.
7(/1(7
6HVVLRQ
&RQWURO
0RGXOH
6WRUHG
3DUDPHWHU
1RQ9RODWLOH
5$0

Agilent Technologies LC Series Specifications

General

Brand	Agilent Technologies
Model	LC Series
Category	Water Pump
Language	English