Agilent Technologies LC Series

Agilent InfinityLab LC Series 1260 Infinity II Isocratic- and Quaternary Pumps User Manual 65
Using the Pump
3
Setting up the Pump with the Instrument Control Interface
Context Menu
The context menu of the dashboard panel contains the following commands:
Control Displays the pump's Control dialog box.
Method Displays the pump's Method Setup dialog box.
Set Error Method Sets the method that is loaded if an error occurs to the
method that is currently available in the hardware.
Identify Device Causes the LED on the front of the module to blink for a few
seconds.
Switch Pump On/Off Toggles the status of the pump, on or off.
Bottle Fillings Displays the Bottle Fillings dialog box.