Agilent Technologies MS40+ - Storage; Preparation for Installation

Instructions for Use
Storage
4
MS40+ Single Stage Rotary Vane Pumps User Manual / 87-901-008-01 (H.00) 50/104
Storage
When transporting and storing the pumps, the following
environmental requirements should not be exceeded:
 temperature: from -20° to +70 °C
 relative humidity: 0 – 95 % (non-condensing)
Preparation for Installation
The pump is supplied in a special protective packing. If this shows
signs of damage which may have occurred during transport, contact
your local sales office.
Total weight of the pack, including the pump, is approx. 35 kg.
When unpacking the pump, be sure not to drop it and avoid any kind
of sudden impact or shock vibration to it.
Do not dispose of the packing materials in an unauthorized manner.
The material is 100 % recyclable and complies with EEC Directive
85/399.
NOTE
Normal exposure to the environment cannot damage the pump. Nevertheless, it
is advisable to keep it closed until it is installed in the system, thus preventing
any form of pollution by dust.