MS40+ Single Stage Rotary Vane Pumps User Manual / 87-901-008-01 (H.00) 55/104
Use
On turning the power switch on, a brief autotest phase is executed,
after which the pump starts to run automatically. To stop the pump,
turn off the power switch. As an alternative, pump starting and
stopping can be controlled remotely over a serial connection.
WARNING!
The pump is designed to operate with inert or non-corrosive gases. It is
categorically forbidden to use it with potentially explosive or flammable
substances.
Maintenance
Personnel responsible for pump operation and maintenance must be
well-trained and must be aware of the accident prevention rules.
WARNING!
Death may result from contact with high voltages. Always take extreme care
and observe the accident prevention regulations in force.
To Next Page
Loading...
