Instructions for Use
Maintenance
MS40+ Single Stage Rotary Vane Pumps User Manual / 87-901-008-01 (H.00) 56/104
WARNING!
When machine is powered take care on account of moving parts and high
voltages.
WARNING!
If you have to perform maintenance on the pump after a considerable time in
operation, leave it to cool as temperature of the outer surface may be in
excess of 60 °C.
WARNING!
Always disconnect the power supply to the pump before starting maintenance
work. Place a special warning signs over the power supply breaker switch:
MACHINE UNDERGOING MAINTENANCE - DO NOT POWER ON. When
finished, remove the safety warning.
WARNING!
Do not change the oil immediately after stopping the machine as the oil
temperature may still be high.
To Next Page
Loading...
Need help?
General
