Technical Information
Transport and Installation
MS40+ Single Stage Rotary Vane Pumps User Manual / 87-901-008-01 (H.00) 68/104
Preliminary Operations
Before starting the pump, check for oil level..
CAUTION!
Oil must be poured into the casing through the special threaded plughole and
NOT through the suction line.
WARNING!
Take out the protective caps on the suction and exhaust flanges before doing
anything else. In the event of an accidental start-up, the air inside the pump
could violently expel the protective caps and harm the operator.
To Next Page
Loading...
Need help?
General
