Agilent Technologies U1251A User's And Service Guide

56 Agilent U1251A/U1252A User’s and Service Guide
2 Making Measurements
Charge Terminal Alert
The meter sounds an alerting beep when the
terminal detects a voltage level of more than 5 V and the
rotary switch is not set to the corresponding location.
The primary display indicates a flashing “Ch.Err” until the
lead is removed from input terminal. See Figure 16.
Figure 16 Charge terminal alert

Agilent Technologies U1251A Specifications

General

Brand	Agilent Technologies
Model	U1251A
Category	Multimeter
Language	English