Features and Functions 3
Agilent U1251A/U1252A User’s and Service Guide 71
Interval Logging
Interval (automatic) logging mode can be specified in Setup
mode.
1 Push for more than 1 second to store the present
value and function on primary display to memory.
and the logging index are indicated. The reading
automatically logs into the memory by every interval set
in Setup mode.
2 Push for more than 1 second to exit this mode.
NOTE
The maximum data that can be stored is 200 entries. When the 200 entries
are filled, “FULL” is indicated on the secondary display.
NOTE
When interval (automatic) logging is enabled, all keypad operation is
disabled, except for LOG function.
To Next Page
Need help?
General
