Agria 3100 - Engine Start and Warm-up Procedures

Edition 03.95 Single-wheel power hoe 3100 25
4. Commissioning and Operation
1/4
Starting the Engine
l Open fuel tap (B/20)
Engine cold:
l Press tickler (B/22) on carburetor un-
til fuel overflows.
l Set speed control lever (C/7) to “max”
(full throttle).
Engine warm:
l Do not actuate tickler on carburetor.
l Set speed control lever (C/7) to
approx. 1/4 throttle.
l Move engine-off-switch (C/3) to oper-
ating position “I”.
l Pull hand clutch lever (C/5) and lock
with pawl (C/6) (start position).
l Pull starting-rope on handle (A/12) until
you feel starter clutch engage. Then pull
hard and fast to start the engine. After
the start, let rope glide back. Do not let
snap.
l Once the engine has started, slowly
move speed control lever to centre posi-
tion and let engine warm up for some
time.