Agria 3100 - Fuel; Lubricants, Anti-Corrosive Agents; Maintenance and Repair; Recommendations

4 Single-wheel power hoe 3100 Edition 03.954 Single-wheel power hoe 3100 Edition 03.95
Recommendations
Lubricants and
Anti-Corrosive Agents
Use the specified lubricants for engine
and gearbox (see “Specifications”).
We recommend using bio-lubricat-
ing oil or bio-lubricating grease for
“open” lubricating points or nipples (as
specified in the operating instruc-
tions).
We recommend using bio-slushing oil
for preservation of machines and im-
plements (do not apply on painted
external covers). Oil can be brushed
or sprayed on.
Anti-corrosive agents are environ-
mentally friendly and degrade fast.
Using ecologically safe bio-lubricants
and bio-anti-corrosives, you contrib-
ute to environmental protection and
to the wellbeing of humans, animals
and plants.
Fuel
The 2-stroke-engine runs on com-
mercial oil-petrol mixtures (for the
specified stoichiometric ratio refer to
“Specifications”). Unleaded regular
and supergrade petrol as well as
leaded supergrade petrol can be
used for the fuel mixture. However,
only use self-mixing special 2-stroke-
engine oil (refer to “Specifications”,
p15).
If, for environmental reasons, you use
unleaded petrol, make sure the fuel is
drained completely when shutting down
the engine for more than 30 days. This
is to prevent resin residue from depos-
iting in the caburetor, fuel filter, and
tank. Or add a fuel stabilizing liquid to
the fuel.
When storing the single-wheel power
hoe at the end of the season, also drain
leaded fuel completely or add a fuel
stabilizing liquid.
For further instructions refer to “En-
gine Preservation”.
Maintenance and
Repair
The trained mechanics of your AGRIA
workshop carry out expert mainte-
nance and repair.
You should only carry out major main-
tenance work and repairs on your
own, if you have the proper tools and
knowledge of machines and internal
combustion engines.
Do not hammer against the flywheel
with a hard object or metal tools as it
might crack and shatter in operation
causing injuries and damage. Only
use suitable tools for pulling the fly-
wheel.