26 Single-wheel power hoe 3100 Edition 03.95
4. Commissioning and Operation
Switching off Petrol Engine
l
Move speed control lever to idling gas
position and let engine run idle for
approx.1/2 minute.
l
Move engine-off-switch to position “0”.
l
Close fuel tap (both fuel taps for 2-
stroke-engine).
I
Note: The engine-off-switch
(C/3) also serves as emer-
gency off-switch. If necessary,
bring switch into position “0” to turn en-
gine off.
I
For longer periods of no opera-
tion, do not switch off engine
with engine-off-switch, but close
fuel tap (both fuel taps for 2-stroke-en-
gine) and let engine run until it slowly
comes to a complete stop due to lack of
fuel. This ensures that carburetor is
empty and no resin residue can deposit.
W
Secure single-wheel power
hoe against unauthorized use
– disconnect spark-plug con-
nector.
To Next Page
Loading...
