CHAPTER 4 CONFIGURATION
14
15
MYCHRON5
The lap setup brings you to the following page:
Lap show time can change between:
n
static
n
rolling
n
- +/- best
n
predictive
RPM frequency: RPM can be read 20 or 50 times per second ( 20 or 50 Hz), in dependence upon
your necessities:
20 samples per second let you have a cleaner signal, and make easier to see the RPM trend,
while 50 samples per second let you better recognize the vibration of the chassis and all the
strengths that can create problems to the ideal movement of your kart.
In the above picture you can see both dat
a, at 20 and 50 Hz, in order to note the differences in
acquisition.
MANUALE IMPAGINATO.qxp_Layout 1 25/11/15 16:04 Pagina 19
To Next Page
Loading...
