CHAPTER 6 DATA RECALL
24 25
MYCHRON5
6. Data Recall
After having finished your test, you can review the data by pressing the MEM/OK
pushbutton.
In every square, you can read the time of the test, how many laps, and the best lap
time.
These two pages don't appear if you have just finished your test; in this case, you see
the following on the first page:
If your last test was at least one day
ago, you can enter the summary page:
It shows the best thr
ee laps of your
test, giving the information about
maximum and minimum RPM, speed,
and temperature(s) for them.
By pushing NEXT, you get:
It shows the three split times for the
best lap.
There, you can select the day of the test
you would like to examine.
After selecting the day, you can select
the test:
MANUALE IMPAGINATO.qxp_Layout 1 25/11/15 16:04 Pagina 29
To Next Page
Loading...
