CHAPTER 7 WIFI CONFIGURATION
30 31
MYCHRON5
Follow these steps to create an AP,
allowing you to connect your PC to
your MyChron5 via WiFi.
This is the most simple and direct WiFi
connection method and is ideal when
you wish to communicate with only
one MyChron5 using one PC.
Your MyChron5 as a default, is configu-
red as an Access Point and creates a
network, without a password,
completely accessible to everyone.
So, for establishing the Wi
Fi
connection:
n
be sure your MyChron5 has the WiFi
enabled
n
read the name of your MyChron5,
available in the lower row of the
OnLine Page:
n
click on the WiFi Icon of RaceStudio3
and select your MyChron5:
In a few seconds the communication will be established.
For setting other parametersIt is therefore recommended that you create a unique
password to secure your device/network immediately. With the use of a password,
the communication is secure and encrypted using the WPA2-PSK standard
7.2 Configuring Your MyChron5 as an AP
MANUALE IMPAGINATO.qxp_Layout 1 25/11/15 16:04 Pagina 35
To Next Page
Loading...
