89
Configuring the Station
■ Station Type:
■ Protocol (IX-DV and IX-DVF(-*) only)
Description Select the station type.
Settings • IX-MV
• IX-MV7-*
• IX-RS-*
• IX-DV, IX-DVF(-*)
• IX-SS-2G
• IX-SSA(-*)
• VoIP Phone
• IX-EA, IX-EAU: Not used.
• IX-FA: Not used.
Default values —
Description Select the communication protocol used to make an outgoing call.
Settings • U: When making an outgoing call, video and audio are sent via unicast.
• M: When making an outgoing call, video is sent via multicast and audio is sent via unicast. This
can be configured only when the recipient is IX-MV7-* or IX-MV.
Default values —
Important
• If "M" was selected, be sure to configure “Multicast Address (IX-DV and IX-DVF(-*) only) (→page 73)”.