Aiphone IX-DV Web Setting Manual

91
Configuring the Station
■ Ringback Tone
■ Call Timeout♦
■ Ringback Tone Count [time(s)]
Description Configure the calling tone heard from this station when an outgoing call is made.
Settings • None
• Call Pattern 1
• Call Pattern 2
• Call Pattern 3
• Call Pattern 4
• Call Pattern 5
• Call Pattern 6
• Tremolo Sound
• Busy Response Tone
• On Hold
• Operation Sound
• Error
• Pre Tone 1
• Pre Tone 2
• Pre Tone 3
• Communication End Pretone
• Call Queue Notification
• Waiting Reply Tone
• Select from the sound source registered in
“Custom Sound Registry (→page 85)”.
Default values Call Button: Call Pattern 1
Option Input 1: Call Pattern 2
Option Input 2: Call Pattern 3
Option Input 3: Call Pattern 4
Option Input 4: Call Pattern 5
Option Input 5: Call Pattern 6
Option Input 6: Tremolo Sound
Description Configure the call transmission time.
Settings • 10 - 600 sec: Select when setting a value from 10 to 600 sec (by 1 sec).
• Infinite: Outgoing call continues until the recipient responds.
Default values 60sec
Note
• When calling a VoIP phone, this will be the shorter time of the time set for "Call Timeout" and the call duration configured on
the IP-PBX.
Description Configure the calling tone ringtone count.
Settings • 1 - 20 times
• Infinite: The calling tone continues to play for the amount of time configured in
“Call Timeout♦
(→page 91)”.
Default values Infinite

Aiphone IX-DV Specifications

General

Brand	Aiphone
Model	IX-DV
Category	Intercom System
Language	English