33
How to use the device
To make a call / To respond to an incoming call
3
Note
• If Auto Answer (→page 61) is "ON," the device will
automatically answer when it receives a call.
• Depending on the settings, communication sounds may
play from separately installed speakers.
• A separate switch or the like may be used to answer,
depending on the settings.
• A call start notification tone or message may play when the
call starts, depending on the settings.
• If the call duration that was previously set on the other
station (for calls with a VoIP Phone, the shorter of the call
durations set on the device and the VoIP Phone) elapses,
the call will automatically end. A notification tone will play
approximately 10 seconds prior to the call ending. The
notification tone may not play, depending on the settings.
• If a page with a higher priority is received from another
station during a call, the call will be interrupted and the
station will switch to the page.
• If a page or a call with a higher priority is received from
another station while making an outgoing call, the outgoing
call will be interrupted and the station will switch to the
page or call with a higher priority.
• The ringtone and ringtone count may differ, depending on
the settings.
• The ringtone may not sound, depending on the settings.
To Next Page
Loading...
Need help?
General
