Aiphone IX-SS-2G - How to Configure Change Destination by Time Delay; How to Configure Standard Mode Settings

56
Settings and Adjustments
Configuring the device on a PC
4
How to configure Standard Mode Settings
Configure the call group number and call priority when “Call Method (→page 54)” is set to [Standard Destination].
How to configure Change Destination by Time Delay
Configure the call group number to switchover, switchover time, and priority when “Call Method (→page 54)” is set to
[Change Destination by Time Delay].
A maximum of eight groups can be configured. Groups will be switched in order at each configured switchover time.
*1 Indicates a required field. The settings should be entered. Retain the default values, unless a change is necessary.
Entry Description Settings Default values
Call Destination This item lets you define the destination
group number.
01 to 10 Call Button: 01
Contact input 1 - 5 call:
-
Option Input 1 - 6: 01
Priority Configure the call priority. • Normal
• Priority
• Urgent
Call Button: Normal
Contact input 1 - 5 call:
Normal
Option Input 6: Urgent
Entry Description Settings Default values
Call Destination Configure the number of the call group to
switchover.
01 to 10 -
Priority Configure the call priority. • Normal
• Priority
• Urgent
Normal
Destination Dwell
Time [sec]
*1
Configure the switchover time for the call
group.
10-600 seconds (1 sec step) 30 sec