49
Settings and Adjustments
Configuring the device on a PC
4
Network Settings
Video (IX-DV and IX-DVF(-*))
■ Video Encoder 1
Configure video settings for calls between IX system stations. The coding system will be H.264 / AVC.
*1 Indicates a required field. The settings should be entered. Retain the default values, unless a change is necessary.
Important
• When the "Frame Rate" is set to "7.5," 10," 15," 20," or "30," the frame rate will drop to "5" fps once approximately 10 minutes
have elapsed since an outgoing call was made.
Note
• The frame rate or bit rate may be lower than the set value depending on the video being sent, the number of recipient stations,
and the network environment.
Entry Description Settings Default values
Resolution Select the resolution for the video. • 320×240 (QVGA)
• 640×480 (VGA)
640×480 (VGA)
Frame Rate [fps] Select the frame rate. 1, 2, 3, 5, 7.5, 10, 15, 20, 30 15
Select Profile Configure the profile. • Baseline
• Main
• High
Main
I-picture interval
*1
Configure the interval at which I-pictures are
sent.
1 - 100 15
Bit rate [kbps] Configure the bit rate. 32, 64, 128, 256, 384, 512,
768, 1024, 2048
1024
To Next Page
Loading...
Need help?
General
