67
Settings and Adjustments
Configuring the device on a PC
4
Email
Configure the email function (function that sends information on station operation to the set email address).
■ Email Addresses
■ Email Event Trigger
Configure the event trigger used to send emails. A event trigger can be configured for each destination.
Important
• If an SMTP server is not configured, email will not be sent even if email is configured. If email is not sent, contact the system
administrator.
Entry Description Settings Default values
Destination 1 -
Destination 3
Configure the address to which to send
email. You can define up to three
addresses.
1 - 64 alphanumeric
characters
-
Entry Description Settings Default values
Outgoing Normal Call An email message will be sent when an
outgoing call of "Normal" priority is made.
• Checked: Send
• Unchecked: Do not send
Unchecked: Do not
send
Incoming Normal Call An email message will be sent when an
incoming call of "Normal" priority is received.
• Checked: Send
• Unchecked: Do not send
Unchecked: Do not
send
Outgoing Priority Call An email message will be sent when an
outgoing call of "Priority" priority is made.
• Checked: Send
• Unchecked: Do not send
Unchecked: Do not
send
Incoming Priority Call An email message will be sent when an
incoming call of "Priority" priority is received.
• Checked: Send
• Unchecked: Do not send
Unchecked: Disable