Aiphone IX-SS-2G User Manual

55
Settings and Adjustments
Configuring the device on a PC
4
*1 Indicates a required field. The settings should be entered. Retain the default values, unless a change is necessary.
Ringback Tone Configure the calling tone heard from this
station when an outgoing call is made.
• None
• Call Pattern 1
• Call Pattern 2
• Call Pattern 3
• Call Pattern 4
• Call Pattern 5
• Call Pattern 6
• Tremolo Sound
• Busy Response Tone
• On Hold
• Operation Sound
• Error
• Pre Tone 1
• Pre Tone 2
• Pre Tone 3
• Communication End
Pretone
• Call Queue Notification
• Waiting Reply Tone
• Select from the audio
sources registered in
“Custom Sound Registry
(→page 52)”.
Call Button: Call
Pattern 1
Option Input 1: Call
Pattern 2
Option Input 2: Call
Pattern 3
Option Input 3: Call
Pattern 4
Option Input 4: Call
Pattern 5
Option Input 5: Call
Pattern 6
Option Input 6:
Tremolo Sound
Call Timeout
*1
Configure the call timer for calls. • 10 - 600 sec: Select when
setting a value from 10 to
600 sec (by 1 sec).
• Infinite: Outgoing call
continues until the recipient
answers.
60sec
Ringback Tone Count
[time(s)]
This item lets you define the number of rings
for the calling tone.
• 1-20 rings
• Infinite: The calling tone will
continue for the amount of
time configured in "Call
Timeout."
Infinite
Note
• When calling a VoIP Phone, this will be the shorter time of the time set for "Call Timeout" and the call duration set on the IP-
PBX.
Entry Description Settings Default values

Aiphone IX-SS-2G Specifications

General

Brand	Aiphone
Model	IX-SS-2G
Category	Intercom System
Language	English