119
Settings and Adjustments
Configuring on the station
4
How to assign Relay Control functions to Speed Dial buttons
(1) On the Speed Dial Settings screen, tap [Relay Control].
– The Set Destination Relay screen will be shown.
(2) Configure detailed settings.
(3) Tap [Set Destination].
– The Set Destination Relay screen will be shown.
(4) Tap [NEW] to configure the station to control the Relay Output.
*To change a registered station, tap the station to change, and tap [EDIT].
*To delete a registered station, tap the station to delete, and tap [DELETE].
– The Set Destination screen will be shown.
To Next Page
Loading...
