120
Settings and Adjustments
Configuring on the station
4
(5) Tap the station to control the Relay.
* If specifying stations in other buildings, tap [SELECT BUILDING] first, and select a building.
*Refer to “Searching for stations (→page 31)” to search for stations.
(6) Tap [ENTER].
– The Set Destination Relay screen will be shown.
(7) Tap [ENTER].
– The Set Destination Relay screen will be shown.
(8) Tap [ENTER].
(9) Tap [SELECT].
– The settings will be saved.
To Next Page
Loading...
