11
Introduction
4.1.3 Add a station
Use this flowchart to add a station.
1. Connect PC to the station to be added.
Connect stations one at a time to avoid IP address conflict.
“Connecting to a PC (→page 41)”
2. Log in to the web server of the station to be added.
“Log in to the Web server of the station to be configured (→page 42)”
3. Set “Language (→page 54)”.
Click [Update] to update the settings.
4. Configure the station.
“Configuring the Station (→page 51)”
5. Add settings data to existing stations if required.
6. Complete.
To Next Page
Loading...
