22
Introduction
4.3.3 Add a station
Use this flowchart to add a station.
1. Connect PC to the station to be added.
Connect stations one at a time to avoid IP address conflict.
“Connecting to a PC (→page 41)”
2. With default IPv4 Address (192.168.1.160), log in to the Web server of the station to be
added.
“Log in to the Web server of the station to be configured (→page 42)”
3. Set "Static / DHCP" to "Static IPv6" and configure "IPv6 Address."
“Static / DHCP (→page 58)”
The station will be restarted with the assigned IPv6 Address.
4. Log in to the web server of the added station with IPv6 address.
“Log in to the Web server of the station to be configured (→page 42)”
5. Set “Language (→page 54)”.
Click [Update] to update the settings.
6. Configure the station.
“Configuring the Station (→page 51)”
7. Add settings data to existing stations if required.
8. Complete.
To Next Page
Loading...
