LEFT HANDLEBAR
1. Clutch lever
The clutch lever has the function of disengaging the driving system from rear wheel,
mainly used in case of starting the engine or shifting gears. Gripping the clutch lever
(1) disengages the clutch.
2. High beam flash button
The high beam flash when the button (2) is pressed.
3. Low/High beam switch
The low beam ( ) was designed to switch on whenever the ignition key is in the
ON position. Simultaneously, front and rear presence lights are activated. In order
to switch to the high beam light ( ) press down the switch (3), automatically the
high beam indicator turns on.
4. Horn button
To actuate the horn sound press the button (4).
5. Turn indicator (blinkers) switch
― Turning the switch (5) to the left, the left turn indicator is activated.
― Turning the switch (5) to the right, the right indicator is activated.
― With the switch on center position, press it down to turn off.
When the turn indicator is switched to the left/right position, the turn indicator
light in the instrument panel will start to flash.
The turn indicator lights do not switch off automatically. Be aware to switch the
indicator lights after turning or overtaking. Otherwise you will provide incorrect
information to the others drivers.
To Next Page
Loading...
