Akuvox C313 Series Admin Guide

C313X Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
13
Parameter Set-up:
 NTP: NTP is switched on by default, which allows the date& time to be
automatically set up and synchronized with the default time zone and the
NTP server (Network Time Protocol). You can also set it up manually by
ticking the check box and then enter the time and date you want and
press the Save tab to save the setting.
 Set Date: Enter the date when it is in manual mode.

Akuvox C313 Series Specifications

General

Audio	Built-in Microphone and Speaker
Installation	Wall-mounted
Ethernet	10/100Mbps
Relay Output	1
PoE	IEEE 802.3af
Power Supply	DC 12V or PoE