10.2 Using the Alber anti-tippers
Push with the foot against an anti-tipper as shown in the graphic illustration.
•
•
At the same time, pull the wheelchair by its handles slightly to the top and rear until
the wheelchair was raised and the anti-tippers engage in a fixed position.
• You can not attach or remove a wheel. Repeat the process with the second anti-tipper
on the other side of the wheelchair.
• Once the wheels have been attached, you can return the anti-tippers to the original
position. To do so, push the wheelchair forward and the holding rod [30] back with
the foot at the same time.
To Next Page
Loading...
