Hardware Description
Page 18 7210 SAS-M Installation Guide
Ethernet Interfaces
The 7210 SAS-M provides 24 100/1000 SFP ports. Each port can be used for a direct connection
to a subscriber’s Customer Premises Equipment (CPE), or as an uplink to another aggregation
node. The 7210 SAS-M supports 10/100/1000 Base-T copper SFPs. In addition, the 7210 SAS-M
24F 2XFP and 7210 SAS-M 24F 2XFP ETR variants support 2 x 10G XFP ports. This port can
serve as a network uplink to another aggregation node or as a direction to a subscriber's CPE.
Management Port
The management port provides a dedicated management interface that is segregated from data
traffic crossing the other ports.
11 Management port
12 Console port
13 Fan tray
Table 3: 7210 SAS-M 24F XFPand 7210 SAS-M 24F XFP ETR Front Panel Features
Key Description
To Next Page
Loading...
