Alcatel-Lucent 7210 - Port Leds; System and Port Leds; Table 8: System and Port Status Leds; Table 9: Port Leds

Hardware Description
Page 30 7210 SAS-M Installation Guide
System and Port LEDs
Port LEDs
The port LEDs are described in Table 9.
See Figure 9 for an illustration of two ports and their corresponding LEDs. See Table 11 key
descriptions.
Table 8: System and Port Status LEDs
LED Condition Status
Critical Red Indicates the presence of a new critical alarm.
Major Amber Indicates the presence of a new major alarm.
Fan Off Indicates that the fans are functioning properly.
Red Indicates that one or more of the fans has failed, or that the fan
tray is not connected.
Note: The LED blinks shortly during the boot process.
Status Green The system has completed boot phase and is running normally.
Note: The status LED turns amber and blinks on power source
failure.
Table 9: Port LEDs
LED Condition Status
SFP ports 1–24 Green Port has a valid link.
Flashing Green Flashing indicates activity on the port.
Off The link is down.
XFP ports 25, 26 Green Port has a valid link.
Flashing Green Flashing indicates activity on the port.
Off The link is down.